 |
 |
 Startsida |
 Rörstrypare |
 Brandtätningslister |
 |
 Intumex L |
| Intumex L-HP |
| Intumex LF |
| Intumex LX |
| Intumex LW |
| Intumex LFC |
 |
| Brandtätning |
| Kontakta oss |
Intumex L-HP
Intumex L/HP is non-ageing graphite based intumescent seal with a starting temperature of approx. 190°C, with a highly efficient performance.
Area of application
Intumex L/HP is an intumescent seal for metal doors, gates and dampers in walls and floors.
Properties
- Powder coating of seal is possible (after preliminary tests)
Guideline value: Furnace temperture: 170°C Maximum air temperature: 190°C Time of exposure: 35 minutes
- Overpainting is possible with standard paints (eg acrylic, chlorinated rubber, 2-component epoxy-resin paints, silicones, etc. – adhesion and compatibility must be checked).
- Resistant to humidity and atmospheric influences
- Free of organic solvents
Area of application
Intumex L/HP is an intumescent seal for metal doors, gates and dampers in walls and floors.
Properties
- Powder coating of seal is possible (after preliminary tests)
Guideline value: Furnace temperture: 170°C Maximum air temperature: 190°C Time of exposure: 35 minutes
- Overpainting is possible with standard paints (eg acrylic, chlorinated rubber, 2-component epoxy-resin paints, silicones, etc. – adhesion and compatibility must be checked).
- Resistant to humidity and atmospheric influences
- Free of organic solvents
 |
 |
 |
|
||
 |
 |
 |
 |
 |
 |
|
 |
|
|
|
